MTS Series 793 Application - Manual (Page 452)

MTS MultiPurpose TestWare®
Data Display Process
Other Process Descriptions 452
Additional Plot Properties
Accessing the
Properties and Print
menu
When you right-click on the plot a menu will appear with two selections,
Properties and Print, as shown below.
If you select Print, the Page Setup window will appear (you can also access this
window by selecting Print from the Options menu). Complete the desired
selections and click OK. The plot will be sent to the printer.
If you choose Properties, the Chart Properties window will appear.
Chart Properties Axis
and Chart Properties
General Tabs
These windows (not shown) allow you to define various properties of the x and y
axes, as well as colors and fonts for each plot. The selections in these windows
take effect on the plot when you press OK.
Zooming Options
You can zoom in on a plot’s axis by pressing the Shift key while holding down
the left mouse button, and then moving the mouse to the area of interest and
releasing the button.
You can zoom in on a part of the trace by pressing the Ctrl key while holding
down the left mouse button, and then moving the mouse to the area of interest
and releasing the button.
Return to default To return to the default plot display, press “r.” This will remove all interactive
scaling and zooming.