MTS Series 793 Application - Manual (Page 497)

Creating Profiles
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 497
Header Data Syntax
The following is an example of proper header data syntax:
FileType= Block-Arbitrary
Date= Fri Aug 12 07:55:44 2000
Description= this is a sample test profile
ActionList= <DO 1 on>, <DO 1 off>, counter1, “counter 2”
Channels= 1
For more information “Action and Counter Syntax” on page 498.
K EYWORD SUGGESTIONS C OMMENTS
FileType= Block-Arbitrary or Phase This required entry must be first.
Date= Last modified date and time This optional entry can be in any form. It can be
omitted.
Description= User-defined description of the
file This optional entry can be in any form (quotation
marks are not needed) on one line. It can be
omitted.
ActionList= See Action and Counter Syntax. This optional entry applies if you have actions or
counters associated with your profile. It can be
omitted.
Channels= Number of channels in profile This required entry must be followed by channel
and channel data definitions for each channel in
the profile.