MTS Series 793 Application - Manual (Page 499)

Creating Profiles
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 499
Level1 Action
mm
5.0000 <DO Off>
-5.0000 “Counter 1”
8.0000
-8.0000
2.000 Counter2
-2.000
5.0000
-5.0000
1.0000
-1.0000 <DO On>
Channel Header Syntax
Following the header data definition, you must define the first control channel.
After the channel definition, you must define the channel data for that channel.
The following is an example of proper channel data syntax:
Channel(n)= channel name
Max= maximum value and units
Min= minimum value and units
Channel Header Syntax
K EYWORD C OMMENTS S UGGESTIONS
Channel(n)= Names the channel; n is the
channel number This is a required entry and must be first. The
channel name is not case-sensitive.
Max= Placed in the file by the Profile
Editor and displayed on the File
Summary tab; useful for
determining an appropriate
range with which to control the
channel. This is an optional entry that specifies the
maximum output for the channel. It can be
omitted.
Min= See “Max=”. This is an optional entry that specifies the
minimum output for the channel. It can be
omitted.
Dimension= Placed in the file by the Profile
Editor to determine the
dimension of a given unit. This is an optional but recommended entry. It
can be omitted.