MTS Series 793 Application - Manual (Page 517)

Creating Profiles
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 517
About Working with Manual Transitions
Sometimes you may want to change the characteristics of row transitions without
affecting the rest of the profile. To do this, you must manually add transition
segments to replace automatically generated transition segments.
This profile is similar to the automatic transition profile, but two rows have been
added to create two “editable” transition segments. To keep the number of
segments the same, the rows that previously specified six segments (previously
rows 0 and 1, now rows 1 and 3) now specify five segments. Also, each row’s
level 1 and level 2 values have been reversed.
The plot appears identical to the automatic transition plot, but now the transition
segments can be edited.
The following profile is similar to the previous profile, but the frequency values
of the added transition segments have been changed.
1
R0
R2
1
1
2 3 4 5
1 2 3 4 5
Row 3
Row 1
R = Row