About the clear counters on reset function, About the clear counters on reset function 53 – MTS Series 793 Application User Manual
Page 53
About the Clear Counters on Reset Function
MTS MultiPurpose TestWare®
Performing Common Tasks
53
About the Clear Counters on Reset Function
With the Clear Counters on Reset check box (found on the Specimen tab of the
MPT Options Editor), you can choose whether run time, channel counters, and
profile counters:
•
Clear when you reset the test (default setting), or
•
Continue to increment after reset
Note
Sequence Counters are always cleared on reset as this counter is used
in the recovery process.
Reset counters manually
If the Clear Counters on Reset control is disabled and you want to manually
reset counters, you can:
•
Select a new specimen (before resuming or between tests), or
•
Right-click to reset each type of counter individually (applies to run time
counters, channel counters, and profile counters)
Use the right-mouse
menu for run time
counters
On the MPT control panel, position the cursor over the run time counter
(ensuring the procedure is locked and reset), and click the right-mouse button to
display the Reset menu. With the Reset menu, you can reset the counter.