MTS Series 793 Application - Manual (Page 80)

MTS MultiPurpose TestWare®
MPT Options Editor Properties Tab
MPT Options Editor 80
For more information
See “MPT Test Progress Panel” on page 28.
See “MPT Channel Counters Panel” on page 32.
See “MPT Sequence Counters Panel” on page 33.
MPT Options Editor Properties Tab
Use the Properties tab to type information that is saved with the procedure.
Access
From the MPT control panel or MPT Procedure Editor window, the access path
is:
> Properties tab
Or, from the MPT Procedure Editor window, an alternate path is:
Tools > Options Editor > Properties tab
Station Status Enables and disables the Power panel on the MPT control panel.
If Power is disabled, the Power panel does not appear on the MPT control
panel.
Counters Enables and disables the Channel Counters and Sequence Counters. In
addition, it controls the counter display format.
Channel Counters—Displays the Channel Counters when enabled
Sequence Counters—Displays the Sequence Counters when enabled
Display Format—Controls the Channel Counters and Sequence Counters
display format. The format options are:
• Cycles - Displays the total number of cycles that have been run.
• Segments - Displays the total number of segments that have been
run.
Control Panel Tab (part 2 of 2)
I TEM D ESCRIPTION