MTS Series 793 Application - Manual (Page 87)

About Cutting, Copying, and Pasting Processes
MTS MultiPurpose TestWare® Working with MPT Processes 87
About Cutting, Copying, and Pasting Processes
You can cut, copy, and paste processes on the same procedure table, or from one
procedure table to another.
Note When you copy a process icon, or a group of process icons, the
parameters of the original processes are retained, but the sequencing
information may not be. You may have to reassign Start and Interrupt
signals.
How to Cut/Copy, and Paste a Process or Group of Processes
1. Select the process or processes you want to copy and paste.
2. On the Edit menu, click Copy Process or Cut Process.
3. Open the procedure table where you want to place the copied processes.
4. Select the process before which you want to paste the processes on the
clipboard.
5. On the Edit menu, click Paste Process.
How to Quick Copy and Paste Selected Processes in the Same Window
1. Click the process or processes you want to copy.
2. Press and hold the Ctrl key, and then drag the selected processes. Use the
insert line to paste the copied process in the desired position.
Note To copy and paste processes between tables in separate MPT
applications, you must use the Copy Process and Paste Process
commands on the Edit menu. Dragging and dropping processes does
not work in this situation.
About Sequencing Processes
You must link the processes in your MPT procedure together so that they start
and stop at the desired times. To do this, you select among various types of
trigger signals for each process to control the execution of the process within the
test procedure.