Barco MFGD 2320 - Manual (Page 14)

User manual MFGD 2320 13
3. OPERATION
3.1. Switching to stand-by position
When the display is on and no on-screen menus are visible, press the
control wheel (4) for a few seconds to switch the display in stand-by.
When the display is in stand-by, press or turn the control wheel to
switch it back on.
3.2. Controlling the display
The control wheel (4) at the bottom (landscape orientation) or at the
side (portrait orientation) allows you to perform controls.
The control wheel is a rotation - click system. It provides the following
functions:
• Short click: Enter menus, confirm selections, and toggle between
different options
• Rotate: Browse through menus, increase or decrease adjustment
values
About the on-screen menus
• The content of the on-screen menus depends on the selected video
input: Some of the functions are present in the analog modes (BNC
and DB15) but are not present in DVI mode.
• The functions that are not present in DVI mode are indicated
with an * throughout this manual.
Navigating through the menus
• The menu system has a hierarchical structure, with several levels.
To display the on-screen menus, turn the wheel (4). The Main Menu
appears. This is the top level of the menu system.
MFGD 2320
MAIN MENU
Autoset*
Video Contrast*
Video Brightness*
Luminance
Adjustments
Input Selection Auto
Settings
Scan Mode
Information
EXIT
* Not in DVI mode