Barco MFGD 2320 - Manual (Page 27)

User manual MFGD 2320 26
4.2. Advanced functions in the Adjustments
menu
Ambient Light Compensation
Ambient Light Compensation is sometimes abbreviated to ALC. See
Introduction.
The Ambient Light Compensation menu contains the following items:
Min ALC .................. Contains two functions to set the minimum point
of the ALC control system:
- Measure Min Ambient Light: Decrease the
light in the room to the minimum possible
level you are likely to work in. Next, execute
this function.
- Min Luminance: Adjust this value until the
luminance is at the level you wish to work
with when the ambient light is at the minimum
level you have set in the above function.
Max ALC ................. Contains two functions to set the maximum point
of the ALC control system:
- Measure Max Ambient Light: Decrease the
light in the room to the maximum possible level
you are likely to work in. Next, execute this
function.
- Max Luminance: Adjust this value until the
luminance is at the level you wish to work with
when the ambient light is at the maximum level
you have set in the above function.
Low Pass Filter*
* Not in DVI mode
The display electronics provide 4 different low-pass filters to filter
possible high-frequent distortion from an analog video signal.
Select a different filter in case the image contains high-frequent noise
or distortion. Select the filter that gives the best result.
Readjustment of sample phase is necessary after selection of a
different filter.