Purenex Multipure Aquaperform - Manual (Page 3)

3
Specifications
• The Multipure Aquaperform Drinking water system (Model# MP880) is designed for use on the countertop next to the sink,
below the sink, or inline with other devices. It can connect to the existing faucet or to the water source below the sink.
• The Aquaperform includes all the accessories and fittings required for installation (except for the MP880sI Inline unit).
• If installation or operation assistance is required, please contact your Multipure Independent Distributor. If the Independent
Distributor is unavailable, please contact Multipure Customer service at 800.622.9206.
Before You Begin
Multipure Drinking water systems (Dws) have been extensively tested and certified by nsF International to provide the highest
level of assurance that the device will perform as claimed. Please read this manual before proceeding with the installation and
use of your system. Installation, operation, and maintenance requirements are essential to the performance of your system –
failure to follow any instructions or operating parameters contained herein may lead to product damage or product failure.
• replacement filters can be purchased directly from Multipure. For the latest prices, please visit our website at
http://www.multipure.com/store/.
• Actual filter life depends on the amount of water used and the level of impurities in the water. See 4.1: Regarding Filter
Capacity for additional details.
• Multipure Drinking water systems are not intended for use with microbiologically unsafe water or non-municipally-treated
water. systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts. See 5.5:
Frequently Asked Questions for additional details.
• Do not allow water to freeze in the system. If the system is exposed to freezing temperatures, drain water from the system
and remove the filter. Allow the filter to thaw before replacing and reusing.
• Do not allow water to sit in the system for extended periods of time (e.g., 10 days or more) without use. See 4.5: Flushing /
Disinfecting the System for additional details.
• To dispose of the used filter, remove it from the housing and place in normal refuse. Filters disposed in a normal landfill will
not release any chemical contaminants and may continue to adsorb additional contaminants in the landfill.
• Check for compliance with any state or local laws and regulations before use.
About the Aquaperform Drinking Water System