Breville 800CPXL - Manual (Page 10)

9 ASSEMBLING YOUR BREVILLE DIE CAST CITRUS PRESS
ASSEMBLING YOUR BREVILLE DIE CAST CITRUS PRESS
Step 1.
Pull the Juicer Press Arm up and backwards,
away from the Motor Base, until fully extended.
Step 2.
Place the Juice Collector onto the Drive Shaft
on top of the Motor Base. Ensure the Juice
Spout fits into the semi-circular groove
at the front of the Motor Base.
Step 3.
Insert the selected Stainless Steel Filter (fine
or coarse) into the Juice Collector, aligning
the indent with the arrow in the bottom of the
Filter over the corresponding tab with arrow
in the Juice Collector. Use the Coarse Filter for
maximum pulp content in the juice and the Fine
Filter to decrease the pulp content in the juice.
800CPXL_IB_V1.qxd:800CP Book 19/8/09 9:23 AM Page 9