Breville 800CPXL - Manual (Page 20)

CARE, CLEANING AND STORAGE
19
• Always ensure that the Die Cast Citrus Press
is switched OFF at the On/Off button and the
plug is removed from the power outlet before
cleaning, disassembling, assembling and
storing the appliance.
• Follow these instructions to clean all surfaces
or parts that come into contact with food
during juicing:-
1. For easy cleaning – immediately after each
use rinse removable parts under warm water
to remove wet pulp. Allow parts to air dry
before reassembling.
2. For thorough cleaning - after disassembling
the appliance, all removable parts should be
washed in hot soapy water or on the top
shelf of the dishwasher. The Motor Base and
Juicing Press Arm should be wiped with a soft,
damp cloth. All parts should be dried
thoroughly before reassembling.
• Store the cleaned and reassembled Citrus
Press in an upright position in a cool, dry
place. Never place any items on top of the
Citrus Press.
CARE AND CLEANING
NOTE: Do not soak the Stainless Steel
Filters or other removable parts
in bleach.
Never immerse the motor base
in water or any other liquid.
Do not use harsh abrasives.
NOTE: Rinse or wash all removable
parts immediately after use.
Dried citrus pulp is difficult to
remove and may stain. If any
staining does occur, wipe the
affected part/s with undiluted
dishwashing liquid, rinse and
dry thoroughly.
800CPXL_IB_V1.qxd:800CP Book 19/8/09 9:24 AM Page 19