Breville 800CPXL User Manual
Page 15
14
OPERATING YOUR BREVILLE DIE CAST CITRUS PRESS
Step 4.
Place a citrus fruit half, cut side down, onto
the Juice Cone.
Step 5.
Grasp the Soft Grip Handle and slowly lower the
Juicing Press Arm and press down firmly until
the Fruit Dome is in contact with the fruit skin.
The motor will automatically start and the
Juicing Cone will begin to rotate. The juice will
be extracted from the fruit and flow through the
Juice Spout into the glass. The pulp and seeds
will collect in the Stainless Steel Filter.
TIP:
Do not lower the Juicing Press
Arm too quickly or the motor
will hesitate and the Juicing
Cone will not spin.
This is because the Diecast
Series Citrus Press is fitted with
a motor that increases in
strength as the motor spins. It
is therefore better to push down
lightly for the first few seconds
to allow the motor to start
spinning.
The motor can then
generate the strength necessary
to cut through tough pulp.
800CPXL_IB_V1.qxd:800CP Book 19/8/09 9:23 AM Page 14