Pololu Simple - Manual (Page 30)

Power and Motor Connectors
Simple Motor Controller
18v7, fully assembled.
Simple High-Power Motor
Controller 18v15 or 24v12,
fully assembled.
Simple High-Power Motor
Controller 18v25 or 24v23
with included hardware
installed.
The fully-assembled 18v7, 18v15, and 24v12 Simple Motor Controller versions ship with terminal blocks soldered
into the large VIN, OUTA, OUTB, and GND pads and a power capacitor pre-installed, as shown in the pictures above.
These terminal blocks make it easy to connect and disconnect power supplies, but they are only rated for 15 A.
Simple High-Power Motor Controller
18v15 or 24v12, partial kit with
included hardware.
Simple High-Power Motor Controller
18v25 or 24v23 with included
hardware.
Simple High-Power Motor Controller
18v15 or 24v12, partial kit with custom
power and motor connectors (NOT
included).
Simple High-Power Motor Controller
18v25 or 24v23 with custom power and
motor connectors (NOT included).
All other versions ship with terminal blocks and a power capacitor included but not installed, which provides
flexibility in making connections. These versions offer two options for connecting to the high-power signals (VIN,
OUTA, OUTB, GND): large holes on 0.2" centers, which are compatible with the included
terminal blocks
Pololu Simple Motor Controller User's Guide © 2001–2014 Pololu Corporation
4. Connecting Your Motor Controller Page 30 of 101