Practical Instrument Electronics 535 - Manual (Page 8)

Model 535 Operating Instructions
82 E. Main Street Suite 3.14 · Webster, NY 14580 Tel: 585-872-9350 · Fax: 585-872-2638 [email protected] · http://www.piecal.com/
Practical Instrument Electronics, Inc. Copyright ã 2011. All rights reserved. 535-9002 Rev G 7/13/11 8-8
Read Voltage Specifications:
Range: 0.00 to 30.00 VDC (with 4X over range)
Resolutions 0.01 VDC
Temperature Effect ≤ ± 200 ppm/°C of range
Input Resistance ≥ 1 MΩ
Accuracy 0.00 to 30.00 VDC ≤ ± (0.1 % of reading ±0.1 V)
Source Voltage Specifications:
Source Range: 0.000 to 24.000 VDC
Output Resistance ≤0.3 Ω
Source Current ≥20.000 mA
Accuracy ≤±(0.025%RDG + 0.004 V) ±50ppm/°C of range
Ordering Information:
4-20/10-50 Milliamp mA/V Loop Calibrator
Includes:
Calibration Test Data
NIST Traceable Certificate
Carrying Case
60 Hz AC adapter
Model 535
020-0200 (included)
020-0102 (included)
Option:
50 Hz AC adapter
020-0101
Option:
External banana jack access to internal 10 W
current sense.
Model 535A
Warranty
Our equipment is guaranteed against defective material and workmanship (excluding batteries) for a period of three years from the
date of shipment. Claims under guarantee can be made by returning the equipment prepaid to our factory. The equipment will be
repaired, replaced or adjusted at our option. The liability of Practical Instrument Electronics (PIE) is restricted to that given under our
guarantee. No responsibility is accepted for damage, loss or other expense incurred through sale or use of our equipment. Under no
condition shall Practical Instrument Electronics, Inc. be liable for any special, incidental or consequential damage.