MacDon PW8 Pick-Up Header User Manual
Pw8 pick-up header
Advertising
Table of contents
Document Outline
- toc
- Declaration of Conformity
- Serial Number
- Introduction
- 1Safety
- 2Description
- 3Operation
- 3.1Owner/Operator Responsibilities
- 3.2Operational Safety
- 3.3Endshields
- 3.4Header Lift Cylinder Safety Props
- 3.5Hold-Down Lift Cylinder Safety Props
- 3.6Daily Start-up Check
- 3.7Shutdown Procedure
- 3.8Break-In Period
- 3.9Changing Header Opening
- 3.10Header Attachment and Detachment
- 3.11Header Transport
- 3.12Header Operation
- 3.13Unplugging the Header
- 3.14Storing the Header
- 4Maintenance and Servicing
- 4.1Prepare Header for Servicing
- 4.2Maintenance Specifications
- 4.3Maintenance Requirements
- 4.4Lubrication
- 4.5Endshields
- 4.6Drives
- 4.7Auger
- 4.8Decks
- 4.9Hold-Down
- 4.10Height Controllers
- 4.11Draper Speed Sensor
- 4.12Wheels and Tires
- 4.13Lights
- 5Troubleshooting
- 6Options and Attachments
- 7Unloading and Assembly
- Declaration of Conformity
- tables
- Table 4.1 Metric Class 8.8 Bolts and Class 9 Free Spinning Nut
- Table 4.2 Metric Class 8.8 Bolts and Class 9 Distorted Thread Nut
- Table 4.3 Metric Class 10.9 Bolts and Class 10 Free Spinning Nut
- Table 4.4 Metric Class 10.9 Bolts and Class 10 Distorted Thread Nut
- Table 4.5 Metric Bolt Bolting into Cast Aluminum
- Table 4.6 Flare-Type Hydraulic Tube Fittings
- Table 4.7 O-Ring Boss (ORB) Hydraulic Fittings (Adjustable)
- Table 4.8 O-Ring Boss (ORB) Hydraulic Fittings (Non-Adjustable)
- Table 4.9 O-Ring Face Seal (ORFS) Hydraulic Fittings