RaySafe X2 Manual - Manual (Page 46)

Make an exposure and read the result.
Note! Users of RaySafe X2 mAs must be aware of the potential damage to generators and of electrical
human hazards in case of improper connection or damaged equipment. RaySafe X2 mAs is intended for
use only by personnel authorized in performing calibration and repair of X-ray equipment.
Tip! You can measure with the R/F or MAM Sensor and the mAs cable both connected to get radiation
and generator current values at the same time.
Tip! Tap a parameter for large digits, to get information about that specific parameter, and, if applicable,
see a waveform.
RaySafe X2 User Manual
46