RaySafe i2 Installation Manual - Manual (Page 20)

20
RaySafe i2 Installation and maintenance manual – Installation
• the system requirements are met.
• you are logged on as local administrator.
• there is no previous version of dose manager installed on the computer (see “dose manager software
update” on page 28).
If windows does not automatically install the cradle driver when the cradle is first connected to a PC, you need
to install it manually. All the driver files are located on the installation Cd in the folder “Cradledriver”. these
files are also copied to the application installation folder when dose manager is installed. when windows
detect a connected cradle and the dialog about driver installation is displayed, select to use the driver files
located on the Cd or in the application installation folder.
doSImeteR And doSImeteR RACk
Check with the local organization where the dosimeters will be stored, this must be a location outside the X-ray
room to prevent registration of X-ray dose when not in use. A dosimeter rack provides room for 5 dosimeters
and can be mounted on the wall of for example the control room.
Figure 12. The dosimeter rack mounting
1. mount the rack with 2 screws to the wall.
2. Clip-on the dosimeters.
NOTE To prevent dosimeters not currently in use to show up on a real time display, the dosimeter
rack should be located preferably more than 10 meters away from the real time display and
not in line of sight.