RaySafe i2 Installation Manual - Manual (Page 24)

24
RaySafe i2 Installation and maintenance manual – System function tests
Figure 14. Dosimeter data in dose viewer
ReAl tIme dISPlAy teSt
onlIne vIew teSt
follow the instructions below to verify that the dosimeter appears in the real time display:
1. Check that the dosimeter appears in the real time display’s online view within 30 seconds.
2. expose the dosimeter to radiation (see “expose dosimeter to radiation” on page 23). the real time display
will show the dose instantaneously (see figure below).