Retsch PP 40 - Manual (Page 23)

08.02.2012 Retsch GmbH
23
0002
General
Cleaning
Do not clean the PP40 with running water.
Danger to life through current surge.
Use only a cloth moistened with water. Solvents are not
permitted.
Maintenance (monthly)
In order to guarantee operating reliability of your PP40 the
following maintenance work should be carried out from time to
time, however at the latest monthly:
Check roller 1 of the closing pin for easy running and
oil if necessary, e.g with sewing machine oil.
(Fig.13 Closing pin)
Clean magnets 2 on closing pin.
Easy running of the roller 1 on the closing pin is necessary for
reliable closing of the housing lid of the PP40.
Wearing parts
These operating instructions do not include repair instructions.
For your own safety repairs should be carried out only by
Retsch GmbH, an authorised agent or service technicians.
Copyright
Distribution or duplication of this documentation, using or passing
on the contents, is allowed only with the express permission of
Retsch GmbH.
Persons violating are liable to pay damages.
Alterations
Subject to technical alterations without notice.
Fig.13 Closing pin
Abb.16 Bedienfeld