S&S Cycle SPO Quiet Baffle (PN 55-6023) - Manual (Page 2)

Your motorcycle exhaust must be cool to the touch before performing this operation.
Be sure to disconnect the negative battery cable before starting this procedure.
1- Remove the four screws in the SPO end plate. You will need a slide hammer with a hooked tip to remove the original baffle from
the muffler. Slide it in, hook it on the back inside edge of the baffle and use the slide hammer to pull the unit out.
2
WARNING
CAUTION
SPO Baffle PN 55-6023
Picture 1