Salsbury Industries 9000 Series Storage Cabinets - Manual (Page 7)

Assembly Special Information – Counter Height Cabinet
The parts for the counter height storage cabinet are much shorter in vertical height than the standard storage cabinet. The only parts that are the
same as in the standard cabinet are the handle, latch, lock bar guides, shelf, and bottom. The Top sits on top of the flanges of the Back and the
Right and Left Uprights and the seven (7) screws and nuts to attach the top are hidden inside the flanges of the Top. The counter height cabinet has
only one (1) shelf and it may be installed in any desired position. Fewer fasteners are required to assemble the counter height cabinet due to the
shorter height. See the illustration below while generally following the instructions for the standard storage cabinet.
SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com engineering @ lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved. (Rev. 04, 1/6/2010) Page 7 of 9