Assembly special information – wardrobe cabinet, Salsbury industries – Salsbury Industries 9000 Series Storage Cabinets User Manual
Page 8
Assembly Special Information – Wardrobe Cabinet
1. Assemble the Back, Notch Strips, Right and Left Uprights, Top, and Bottom in that same manner as in the standard cabinet.
2. Assemble the two (2) Rod Hangers to the outside of the centers of the side flanges of the Top Shelf. Each Rod Hanger is fastened with two (2)
screws and nuts. Install the Coat Rod into the hangers before fastening the second hanger. See illustration below.
3. Assemble the Door Frame Assembly to the Right and Left Uprights and Top in the same manner as in the standard cabinet.
4. Assemble the Top Shelf with installed Coat Rod into the cabinet in the same manner as installing a Shelf into the standard cabinet.
5. The Doors, Handle, Latch, and Lock Bars are assembled in the same manner as in the standard cabinet.
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com engineering
@
lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved. (Rev. 04, 1/6/2010) Page 8 of 9