Buick REGAL 2011 - Manual (Page 172)

Black plate (22,1) Buick Regal Owner Manual - 2011
7-22 Infotainment System
Locate the device named
“General Motors” or “Your
Vehicle” in the list on the cell
phone and follow the instructions
on the cell phone to enter the
four‐digit PIN provided by the
system.
6. The system prompts for a name
for the phone and confirms the
name provided. This name is
used to indicate which phone is
connected.
7. The system responds with
“<Phone name> has been
successfully paired” after the
pairing process is complete.
8. Repeat Steps 1 through 7 to pair
additional phones.
Listing All Paired and Connected
Phones
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
Deleting a Paired Phone
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
5. Select the phone to delete and
follow the on‐screen prompts.
Linking to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
available to be connected to the
Bluetooth system before the
process is started.
1. Press the CONFIG button.
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
5. Select the new phone to link to
and follow the on‐screen
prompts.
If delete is selected, the
highlighted phone will be
deleted.
Making a Call
1. Press the
V
/
$
button twice.
2. Enter the character sequence.
See “Entering a Character
Sequence” in Operation on
page 7‑4 for more information.
3. Select Call to start dialing the
number.
Accepting or Declining a Call
When a call is received, the
infotainment system mutes and a
ring tone is heard in the vehicle.
Accepting a Call
Turn the
Z
knob to Answer and
press the
Z
knob.
Declining a Call
Turn the Z knob to Decline and
press the
Z
knob.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.