Ignition positions, Ignition positions -17, Driving and operating 9-17 – Buick REGAL 2011 User Manual

Page 207

Advertising
background image

Black plate (17,1)

Buick Regal Owner Manual - 2011

Driving and Operating

9-17

Following break‐in, engine speed
and load can be gradually
increased.

Ignition Positions

The ignition switch has four different
positions.

Notice: Using a tool to force the
key to turn in the ignition could
cause damage to the switch or
break the key. Use the correct
key, make sure it is all the way in,
and turn it only with your hand.
If the key cannot be turned by
hand, see your dealer.

The key must be fully extended to
start the vehicle.

To shift out of P (Park), turn the
ignition to ON/RUN and apply the
brake pedal.

A (STOPPING THE ENGINE/
LOCK/OFF):
When the vehicle is
stopped, turn the ignition switch to
LOCK/OFF to turn the engine off.
Retained Accessory Power (RAP)
will remain active. See Retained
Accessory Power (RAP) on
page 9‑21
for more information.

This is the only position from which
the key can be removed. This locks
the steering wheel, ignition, and
automatic transmission.

Do not turn the engine off when the
vehicle is moving. This will cause a
loss of power assist in the brake
and steering systems and disable
the airbags.

In an emergency, if the vehicle must
be shut off while driving:

1. Brake using a firm and steady

pressure. Do not pump the
brakes repeatedly. This may
deplete power assist, requiring
increased brake pedal force.

2. Shift the vehicle to neutral. This

can be done while the vehicle is
moving. After shifting to neutral,
firmly apply the brakes and steer
the vehicle to a safe location.

3. Come to a complete stop. Shift

to P (Park) with an automatic
transmission, or neutral with a
manual transmission. Turn the
ignition to LOCK/OFF.

Advertising