Buick REGAL 2011 - Manual (Page 180)

Black plate (30,1) Buick Regal Owner Manual - 2011
7-30 Infotainment System
2. Say “Digit Dial.” The system
responds “Digit dial using
<phone name>, please say the
first digit to dial,” followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the entire number has been
entered, say “Dial.” The system
responds “OK, Dialing” and dials
the number.
. If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
. To hear all of the numbers
recognized by the system,
say “Verify” at any time.
Using the Call Command
1. Press
b
/
g
.
. For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
. For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Call.” The system responds
“Call using <phone name>.
Please say the name tag,”
followed by a tone.
3. Say the name tag of the person
to call.
. If the system recognizes
the name tag, it responds
“OK, calling <name tag>”
and dials the number.
. If the system does not
recognize the name tag, it
confirms the name tag
followed by a tone. If the
name tag is correct, say
“Yes.” The system responds
with “OK, calling <name
tag>” and dials the number.
If the name tag is not
correct, say “No.” The
system will ask for the
name tag again.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re‐dial Command
1. Press
b
/
g
.
. For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
. For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say