SciGene Little Dipper Processor for FISH - Manual (Page 15)

Little Dipper ® Processor for FISH— USER MANUAL
March 2013 LD for FISH manual 2.0; software 1.4 for FISH 14
12. Carefully place slide rack onto gripper (Fig. 28). The instrument will perform the
steps as programmed.
13. At completion (varies by protocol), remove the rack from the centrifuge (Fig. 29)
or from above the last bath (Fig. 30), if running a protocol without centrifugation,
by pushing the thumbpad to open the gripper paddle.
14. Clean the instrument per section VI. B. Cleaning After Every Use.
Fig. 27. Press Start Now. Fig. 28. Load sample rack.
Fig. 29. Remove rack (option 1). Fig. 30. Remove rack (option 2).