Keypad lock (optional on most models), Never keep keys within the reach of children, Page 9 – Summit SPF5DSSTBADA User Manual
Page 9: If your model has a front lock (selected models)
Felix Storch, Inc.
SUMMIT PROFESSIONAL DIV.
Page 9
KEYPAD LOCK (optional on most models)
Factory set default password: The factory set default password is 0123. If the default password is lost,
press the
key (located inside the battery box) for 30 seconds, then wait for the warning sound
which signifies the factory set default password has been restored.
To set the password: While door is open, press the
key (located inside the battery box) until it
jingles, enter the 0123 password then the # key within 10 seconds to confirm. Enter the password (1-16
digits), then press # again to confirm. A total of 10 passwords can be set.
Note: Each password starts from the number 0 to 9 in order. The first password starting with 0 is the default password.
For example, use 1xxx, then 2xxx etc. for 10 users.
Changing password: While the door is open, press the
key (located inside the battery box) until it jingles, enter the
old password and press # within 10 seconds to confirm. Enter new password then press # to confirm. Note that the first
digit cannot be changed.
To open the door: While the door is closed, press the
key, enter the password then press
again to confirm.
To lock door manually: Press #.
Function setting of automatic lock: To set the auto-lock to lock on a preset time interval, press the
key (inside the
battery box), enter a number (the time interval in seconds from 10-99) then press # to confirm. The auto-lock time can be
set between 10-99 seconds after opening the door. If the time is set less than 10 seconds, the door will not lock
automatically, only manually.
Deleting the door-opening passwords: Press the
key, enter default password followed by 0000, then press # and
all the door-opening passwords will be deleted except for the default password.
Note: To access the battery box you need to remove only the two small screws on the top and bottom of that cover. Do
not remove the 4 screws holding the keypad and cover to the appliance door.
IF YOUR MODEL HAS A FRONT LOCK (SELECTED MODELS)
Your lock has a feature called automatic key eject. To lock or unlock the appliance, you must push and hold the key in the
lock while turning. The lock is spring-loaded, so the key cannot be left in the lock.
If the key is lost, contact your dealer or SUMMIT APPLIANCE to purchase a replacement. Always give the model and
serial number of your appliance when requesting a replacement key. Keys for most models can be ordered online at
www.summitapplianceparts.com
NEVER KEEP KEYS WITHIN THE REACH OF CHILDREN