BOXLIGHT XD-10m - Manual (Page 22)

14
U s i n g t h e P r o j e c t o r
Using the Keypad and Remote Buttons
While the menus are displayed, the source and reset buttons on
the keypad and the up and down arrow buttons on the remote
act as menu navigation and adjustment buttons and the
menu/select button acts as a select button. See “Using the On-
Screen Menus” on page 16 for details.
F IGURE 11
Keypad and remote buttons
Menu/select
NOTE: If you have turned Auto
Source off (page 22), you may
need to press the source button
more than once to display an
active source. The sources switch
in this order: data analog, data
digital, S-video, and composite
video.
Press the menu/select button to open the on-screen menus. Press
menu/select again (while Exit is highlighted) to close the menus.
(The menus automatically close after 30 seconds if no buttons are
pressed.) When you close the menus, the projector saves any
changes you made. For more information about the on-screen
menus, see page 16.
Source (keypad only) or Data and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
source button on the keypad or the data or video button on the
remote.
menu/select
source
reset
LED
data
video keystone
forward
back
menu/select