Bushnell TROPHY CAM 119425C2 - Manual (Page 14)

14
How Parameter Settings Are Displayed
Some more detail regarding how the settings for a parameter are
indicated on the display:
•
Only one setting is displayed at a time, starting with the current
setting for the parameter when it is first selected (Fig. 4a). To change
the setting, use the UP/DOWN keys to display the new setting you
want (Fig. 4b), then press OK to “Execute” (make the actual change
to this setting). If you want to confirm this setting is now the current
one, just press the RIGHT key to scroll to the next parameter, then
press LEFT to go back again to the previous one. You should see the
parameter setting you just made.
Fig. 4: Selecting Parameter Settings
(4a)
(4b)
Press MENU
Press DOWN
Press OK