Summit TDC111V User Manual - Manual (Page 10)

WARNING!
To reduce the risk of electric shock or injury to
persons, read the "Important Safety Instructions"
section before operating this appliance.
Below are step-by-step instructions to help you
achieve the best possible tumble drying results.
1 Sort your fabrics
You will achieve the most uniform drying
results if the items are made of the same
type of material. Close zippers and fasten buttons
or belts; sort the items and adjust load and
temperature.
2 Turn on the main power switch.
3
Open the door, load the items,
and then close the door
4 Select the program
Guidelines as to what specific
programs can be used for.
The Auto Heavy, Auto Normal and Auto Delicate
programs have two temperature settings. Normal
temperature, but also low temperature for more
delicate items.
Auto Heavy
Temperature Normal. This program is for items
that are particularly difficult to dry, such as jeans
with very thick seams.
Auto Normal
Temperature Normal. These programs shut off
the heat once the load is dry but before it is
"bone-dry". The Auto Normal program shuts off
the heat slightly later than Auto Delicate. Use trial
and error to find out what works best. Use these
programs when you want items to be completely
dry.
Auto Delicate
Temperature Normal. These programs shut off
the heat once the load is dry but before it is
"bone-dry". The Auto Normal program shuts off
the heat slightly later than Auto Delicate. Use trial
and error to find out what works best. Use these
programs when you want items to be completely
dry.
Auto Heavy
Temperature Low. This program is for items that
are particularly difficult to dry, such as jeans with
very thick seams.
Auto Normal
Temperature Low. These programs shut off the
heat once the load is dry but before it is
"bone-dry". The Auto Normal program shuts off
the heat slightly later than Auto Delicate. Use trial
and error to find out what works best. Use these
programs when you want items to be completely
dry.
Auto Delicate
Temperature Low. These programs shut off the
heat once the load is dry but before it is
"bone-dry". The Auto Normal program shuts off
the heat slightly later than Auto Delicate. Use trial
and error to find out what works best. Use these
programs when you want items to be completely
dry.
Auto Iron Dry
This program shuts off the heat once the load is
just damp enough for ironing or pressing.
Customer Care Center
1-800-898-1879
10
www.askousa.com
Operating instructions