Installation, Log set installation – Regency Ultimate U38 Medium Gas Stove User Manual

Page 16

Advertising
background image

16

Regency

®

U38-1 ULTIMATE Freestanding Gas Stove

INSTALLATION

LOG SET INSTALLATION

Embers

Embers

The "02" refer numbers (i.e. 02-65) are

molded into the rear of each log.

Note: Install Optional Brick Panels prior to

installing logs.

1) Carefully remove the logs from the box and unwrap

them. The logs are fragile, handle with care - do
not force into position.

Pins on Rear Log Support

A)02-65

B)02-56

3) Place Rear Log A)02-65 on the two pins on the rear

log support.

4) Place the Middle Left Log B)02-56 on the two pins

as shown.

Read the instructions below carefully and refer to
the diagrams. If logs are broken do not use the unit
until they are replaced. Broken logs can interfere
with the pilot operation.

The gas log kit contains the following:

a) 02-65

Rear Log

b) 02-56

Middle Left Log

c) 02-44

Front Left Log

d) 02-46

Left Top Log

e) 02-45

Front Right Log

f) 02-47

Center Log

g) 02-48

Middle Right Log

h) 902-151

Embers

i) 902-154

Lava

j) 946-669

Platinum Embers

(supplied w/packaged manual)

2) Sprinkle the embers on the left and right sides of the

fi rebox base.

Advertising