Regency FireWizard - Manual (Page 16)

Page 16 FPI FireWizard TM Remote Control Manual
6) Programming the Set Temperature for the On-Time of Program 2
Press and release the PROG button one more time to program the Set
Temperature of Program 2. Use the “+” and “-” buttons to adjust the temperature
setting.
7a) Programming the Rest of the Week
Repeat steps 2 to 6 until all 7 days have been programmed.
7b) Alternatively, Copy Programs Over to the Other Days
Pressing and holding the PROG button for 2 seconds or longer will initiate the
copying process.
Program 1 Setting of Monday
The next Day of Week flashes
Program 2 Set Temperature
Programming of Program 2