Regency FireWizard - Manual (Page 18)

Page 18 FPI FireWizard TM Remote Control Manual
INTERFACING WITH MANUAL CONTROL
When the unit is turned ON using the Remote Control and is later switched OFF from the
Manual Control Panel, the LCD on the Remote Control will still display as being ON
even though the unit is actually OFF. To have the unit function from the Remote Control
again you must press the ON/OFF button twice -- once to turn the remote OFF and then
again to turn the unit ON from the remote.
When the unit is turned ON from the Manual Control Panel, the LCD on the Remote
Control will display as being OFF even though the unit is actually ON. To have the unit
function from the Remote Control you will need to press the ON/OFF button once to turn
ON the remote.
TROUBLESHOOTING / BATTERY REPLACEMENT
If the remote control does not turn on:
• Ensure the batteries are correctly installed in the receiver.
• Check the batteries for replacement (2 x AAA alkaline).
When batteries are replaced, only the current time and day will need to be reset. The set
program times are not affected.