Regency FireWizard - Manual (Page 9)

FPI FireWizard TM Remote Control Manual Page 9
MANUAL MODE
Manual mode can be selected by pressing and releasing the AUTO/MAN button until the
symbol “MANUAL” is shown on the LCD.
In Manual mode, the Fan speed and Flame settings can be adjusted independently using
the Remote.
FAN Speed Adjustment
The FAN button is used to switch on and change the selected fan speed.
If the Fan is off, pressing and releasing the FAN button once will turn the fan on at High
speed for 4 seconds and then to Low speed.
Pressing and releasing the FAN button again will change the speed to Medium.
Pressing and releasing the FAN button again will change the speed to High.
Pressing and releasing the FAN button again will switch the Fan OFF.
The display on the LCD will be as follows:
Fan on Low Speed Fan on Medium
Speed
Fan on High Speed Fan = OFF