Talos Security NVClient User Manual
Page 17
User Manual for Digital Surveillance Center Management Software
- 17 -
Task Setup
Server: Select the DVR/s that you want to record by day and time from the drop-down menu
Channel: Select the channel/s of the DVR that will be recorded
Begin Time: Set the time the client software will begin recording from the DVR
Stop Time: Set the time the client software will end recording from the DVR
Run Fre: Set the frequency to run the task
Delete All: Removes all DVRs from the server list
Add All: Add all servers monitored by the client software and are set for auto logon
Add Task: Click to save the task as set
Modify Task: Click to enter the task and modify the settings
Delete Task: Click to remove the task
5.1.1.5
Service
The Service interface controls interaction between the DVR and an internal or external alarm
device. The client software allows the local PC to react to an alarm event notifying the user and
beginning to record based on set criteria.