Talos Security NVClient - Manual (Page 18)

User Manual for Digital Surveillance Center Management Software
- 18 -
5.1.1.5.1 Alarm Linkage
Enable Alarm Record: During an alarm the client software can record video to the local PC.
Enable Record On Alarming: Links recording to alarm trigger
Record Time: Set the duration of the recording from 30 to 600 seconds
Server: Select the DVR that will that will trigger recording of an alarm event
Alarm Type: Select Probe Alarm, Motion Alarm, or Video Loss
Channel: Select the video channel an alarm is linked to
Record Channel List: Select the DVR channels to record if an alarm is present
Click "Apply" then "OK" to save settings.
5.1.1.5.2 Alarm Sound Setup
Allows the user to select sounds associated with an alarm event; Motion Detect, Video Loss, and
Probe Alarm.
5.1.1.5.4 Local PC Display
Enable Auto Show Alarm Channel: When logged on and connected to a DVR, this function
allows the client software to open the channel with an alarm event present in full screen mode.
Enable Show Alarm Info: Displays the status of an alarm event on the local PC.
If Break Keep Last Image: Continues to display the last image captured prior to loss of video.
Enable Channel Name As Record Path: Uses the DVR channel name in the file name of
recorded video.
5.1.1.5.5 Hardware Decode
For large installations with multiple DVRs and monitors, this function allows a decoding card to
display the status of a DVR channel. Resolution modes are 640 x 520 and 704 x 576.