Talos Security NVClient - Manual (Page 22)

User Manual for Digital Surveillance Center Management Software
- 22 -
Network Video Server Settings
Log on to the Network Video Server, open the Network Settings menu, and click the radio button
"Enable Send Notify to NVClient" or "Enable Back Connect". In the box "Object Host" enter the
IP address of the PC hosting the client software.
Port: Input the listen port of client (for example 7777).
Time: The interval that the video server reports the back connection. It is recommended to set the
interval between 3 and 10 seconds.
Click "Save" to save settings.