Telematrix SP400 PROGRAMMING - Manual (Page 5)

Using a Pause when Dialing a Phone Number
To use a Pause when dialing, press the “PAUSE” key at the appropriate point in the
number sequence being dialed from the key pad.
NOTE: Each “Pause” counts as 1-digit when stored into a speed dial memory location.. !
NOTE: The default Pause timing is 3.6-seconds.
A multiple of Pauses can be programmed
into speed dial memory to increase the delay.
!
Note: Programming can
only be performed when
the phone is off-hook
!
Programming Pause into Voice Mail
To store a Pause time into Voice Mail memory, simply press the Pause key in the number-
ing sequence when programming the Voice Mail Speed Dial Key. See programming Voice
Mail on the next page.
Programming a Pause into Speed Dial Memory
Pause time can be programmed into the speed dial memory. This function will delay the
dialing pattern of a number when stored in the phones speed dial memory. Multiple pauses
can be programmed into the dialing pattern for added delay time. To store a Pause into
Speed Dial memory, simply press the Pause key in the numbering sequence when pro-
gramming Speed Dialing Keys. See programming Speed Dial Memory on the next page.