Telematrix SP400 PROGRAMMING - Manual (Page 4)

Programming Pause Timing
A Pause time between 1.0-seconds to 5.0-seconds can be programmed into memory.
This function allows for a delayed timing for those systems requiring a different time
delay and allows the user to delay the dialing pattern of a number. This function may
be required for accessing line features provided by telephone provider or local
telephone company. A speed dial number may need to pause during its dialing
sequence to ensure proper connections.
PROGRAMMING THE PAUSE TIME OPTION
Pause timing can be programmed for different timing options listed below.
1. Lift the Handset from it’s cradle so it is in a off-hook position.
2. Press the “STORE” key once.
3. Press the “#” key for 3-seconds until an alert sound is heard.
4. Program the pause time into memory by using the keypad. Press the following
keys on the keypad in the order shown for the desired pause time.
For 1.0-second press "1" "0" then “#”.
For 2.0-seconds press "2" "0" then “#”.
For 3.6-seconds press "3" "6" then “#”.
For 4.0-seconds press "4" "0" then “#”.
For 5.0-seconds press "5" "0" then “#”.
4. To exit the program mode, place the handset back in the cradle in an on-hook
position.
NOTE: If you require a pause time delay longer than the maximum setting of 5.0S,
stack the pauses within the dialing pattern to achieve the longer timing.
!
NOTE: The default Pause time is 3.6-seconds. !