Telematrix SP400 PROGRAMMING - Manual (Page 7)

Programming Procedure Speed Dial Features
The Spectrum PLUS TM Telephone has eleven (11) one-touch speed dial locations that are
convenient for dialing frequently used telephone numbers.
•
Speed dial programming must be done with the telephone plugged into the telephone line and power adapter.
•
Programming can be performed with the telephone off-hook only.
•
A maximum of 32-digits can be entered into ENTER NUMBER.
Programming Procedure
1. Speed dial or Voice Mail programming must be done with the telephone plugged into
the telephone line.
2. The handset must be “off-hook”.
3. Press the “Store” key.
4. Dial the telephone number that is to be saved using the numeric dial pad.
5. Press the desired speed dial location keys (1-11) or the Voice Mail key where the
number is to be saved.
6. To program additional numbers, repeat steps 3 thru 4.
7. Place the convenient pre-printed speed dial keycaps on the selected speed dial
memory key or complete the paper index card and place it into the clear protective
keycap. Install the keycap on the appropriate speed dial memory key.
NOTE: Blank index card sheets are provided
for your convenience. Complete and place the
index card into the speed dial memory key.