Thrush DSHE Series - Manual (Page 4)

Thrush Co.
Manual #9636-0555
Section 1
General Product Information
1.1 Overview
The Thrush Hot-Pak
® has been carefully assembled and factory tested to provide years
of trouble-free service. This manual provides information to allow the installer/operator to
install, operate, service and maintain the Hot-Pak. In this manual the installer/operator
will find that multiple Hot-Pak models are covered. Visually these different models will
look very similar. The main difference between models is the height and diameter of the
unit. The model number designates the size of the unit (Figure 1-1 Overview). Although a
standard configuration is shown throughout this manual, optional equipment is available.
Model Designation
D S H E ‐ 6 4 2
No. of Tube Passes
Bundle Length (FT)
Bundle Diameter (IN)
Horizontal Design
Steam to Water
Double Wall Construction (Optional)
Extended Surface Area (Optional)
36"
MAX.
WATER INLET
WATER OUTLET
STEAM INLET
CONDENSATE
DRAIN
Shell
Jacket
Insulation
Tube Bundle
SAFETY RELIEF VALVE
OPEN AREA OF
LAST BAFFLE
TEMPERATURE SENSOR
CONNECTION
Figure 1-1 Overview