Brother DCP-8085DN - Manual (Page 111)

Troubleshooting and routine maintenance
97
C
c
Clean the corona wire inside the drum
unit by gently sliding the blue tab from
right to left and left to right several times.
Note
Be sure to return the blue tab to the home
position (a) (1). If you do not, printed
pages may have a vertical stripe.
d
Put the drum unit and toner cartridge
assembly back in the machine.
e
Close the front cover.
f
Plug the machine’s power cord back into
the AC power outlet first, and then
reconnect all cables. Turn on the
machine’s power switch.
IMPORTANT
To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations below.
1