Unisteer 8012000-01 Ford Fairlane & Ranchero Rack 1966-1967 - Manual (Page 6)

Page 6 656800
8. You are now ready to install the rack and pinion assembly. First verify that the rack is centered. Then
you can put the rack up in place. Then install the 2 bolts on the passenger and the 2 bolts on the
driver side from the outside of the frame in and install the flat washers and lock nuts but do not
tighten. Once all hardware is in hold the bracket & rack so that the bracket is square to the ground at
ride height and tighten the bolts to 50 ft lbs.
9. You can now eye up your tires toward the straight position and connect your outer tie rod ends and
install supplied cotter pins. Install grease fittings.