Unisteer, Pump installation, Performance products – Unisteer 8010540-02 Camaro 1967-69/Nova 1968-74 Power Rack & Pinion User Manual
Page 7
pg. 7
655410
Pump Installation
The rack & pinion has #6 AN fittings included. The larger port is the pressure and the smaller is
the return. Torque these fittings to 20 ft/lbs.
If you are using the new “GEN II” style pump please be sure to closely follow the accompanied
pump installation instructions. Use ONLY power steering fluid in this pump and add the fluid to
the pump slowly. The rack must be rotated slowly as you add the fluid.
Alignment Specs:
Toe: 1/16 to 1/8 inch in
Camber: ¼ degree positive
Caster: 1.5
– 2 degree positive
UNISTEER
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
(6/11/2014)
Copyright © 2009 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying, recording or by any information storage
and retrieval system, without permission in writing from Maval Manufacturing Corporation.