Unisteer 8001050-02 Ford Faicon/Comet 1960-65 - Manual (Page 4)

pg. 4
655600
7. When wheel is removed go under the dash and disconnect wire harness from column to
vehicle. Note: If vehicle does not have a hard-shell connector, disconnect one wire at a time
and mark with number stickers.
8. Remove two retaining bolts under dash that secure column to dash and remove steering
column shell. Note: Do not lose ring around shaft.
9. From under car, remove bolts that retain gearbox to frame. Remove gearbox and shaft from
vehicle. Note: It may be necessary to remove your driver side header if so equipped to gain
clearance for gearbox removal.