Unisteer 8052760 Improved Electra-Steer Ididit Column User Manual
Page 4
Advertising
Page 4
657240
6. Clean any burs off of each end inside and out.
7. Take the electric motor assembly with the adapter already on it and slide it up into the upper bell half
of the column. Make sure the coupling is tight on the motor and that the column shaft goes into the
coupler a safe distance. Once it is in tighten the set screw through the hole in the column to tighten
the coupler on the column shaft and screw the three screws into the unit to hold it together.
Advertising
This manual is related to the following products: