Unisteer 8012350-01 Ford Galaxie 500 Rack & Pinion Kit 1965-67 User Manual
Page 11
Advertising
Page 11
657340
18. You can now torque the mounting bolts for your rack to 65 ft. lbs. Then torque the u-joint bolts to 40ft
lbs.
19. Install the outer tie rod ends and tighten lock nut on steering arm to 45 ft. lbs. Adjust the toe by eye so
you can drive to an alignment shop. This is done by turning the inner end. You do not have to take off
outer end to adjust. Tighten jam nut once toe is set. Screw in Zerk fitting and grease.
Advertising