Chemi 410 camera kit with manual lens – UVP BioChemi 500 Camera User Manual
Page 6
Chemi 410 and BioChemi 500 Cameras
6
Chemi 410 Camera Kit with Manual Lens
Installing on the EC3 Imaging System
The photograph shows parts required for assembly of the camera kit with the manual zoom lens onto the EC3 Imaging
System.
Set up the Darkroom and unplug all components from the power outlet. Refer to the EC3 Imaging System
Manual for more information.
Screw the base mount and gasket (3) to the darkroom with the thumb nuts (10). Note: This step may be
completed by the manufacturer. (If the base mount is already attached proceed to step 3.) Place the gasket
between the base mount and darkroom. Ensure that the gasket prevents light leaks into the dark room around the
lens.
Attach the camera bracket (4) to the base mount with the brass thumb nuts (10).
The camera (2) is preassembled with the manual lens (7), step-up ring (6) diopter (9) and magnifier (8). Place the
camera/lens assembly over the base mount and secure the camera to the bracket (4) with the knob (5).
Attach the magnifier (8) to the back of the lens and then attach the camera (2) to the magnifier.
Place the camera/lens assembly in the hole in the base mount and then use the knobs (5) to secure the camera
in place attaching it through the hole at the top of the bracket (4).
Connect the camera power supply from the EC3’s camera well to the camera. Locate the cable extending from
the top of EC3 darkroom. If upgrading the system, plug the power supply into the wall outlet.
Install the VisionWorksLS software to run the camera if not already installed. Refer to the PDF VisionWorksLS
software manual on the Support CD or use the Help Files embedded in the software for more information.
Once the software is installed, connect the camera
’s USB cable to the camera and then into an available port on
the computer.
1. USB cable
2. Chemi 410 Camera
3. Base mount and gasket
4. Bracket
5. Knobs
6. Step-up ring
7. Manual Lens
8. Magnifier
9. Diopter
10. Thumb nuts
11. Power cord
12. Camera power supply
1
2
3
4
5
6
7
8
9
10
11
12