UVP OptiChemi 600 Camera - Manual (Page 6)

OptiChemi Camera 6
•
Under the general tab select "Internet Protocol
(TCP/IP)" and left click the "Properties" button.
Enter the following information:
•
IP address: 192.168.1.1
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.1.117
•
Leave the DNS entries blank
**** NOTE: Write down the old settings before you change your TCP/IP properties if you will need to restore these
settings at a later date ****
•
Select "OK" twice to return to the desktop. Some computers may require a restart before the new TCP/IP settings
will take effect.
•
If the computer controlling the camera is also connected to the Internet or to a local network, the camera should
be connected to the computer’s built-in network port. The supplied Ethernet-to-USB adapter can then be used for
the Internet/local-network connection (UVP part number 89-0380-01).